60pcs 1/8 Inch Mandrel Fiberglass Reinforced Cut Off Wheel for Dremel


100 in stock

60pcs 1/8 Inch Mandrel Fiberglass Reinforced Cut Off Wheel for Dremel
Material: Resin
Disc Diameter: Approx. 32mm/1.26"
Disc Thickness: Approx. 0.9mm/0.035"
Shank Diameter: Approx. 1/8"
Shank Length: Approx. 37mm/1.47"
Maximum Line Speed: 20000 (rpm)
1.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Use light pressure – heavy pressure may break the wheel.
Cut Wood & Plastic a lower speeds, Metal at higher speed.
Fits any Rotary Tool, including Dremel, Craftsman & Chicago.
Excellent for cutting, trimming & grooving Metal, Wood, Plastic.
Aluminum Oxide Reinforced Fiberglass – Cuts only along its edge.
Please note:
1. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.
2. Secure objects to a stable surface while working.
3. Hold the tool so that the wheel is at a perpendicular angle to the material being cut.
4. Keep a light touch, as the wheel will break under too much pressure. If chattering occurs, increase speed.
5. Plastics require very slow speeds, because they tend to melt at the contact point. Wood requires low speeds also, always experiment on a scrap first.
Package Included: 
60pcs x Cut Off Wheel Disc 
1pc x Mandrel
More Details: