Mini 20W Electric Heating Hot Melt Glue Gun Profession Tool For Hobby Craft DIY US Plug


Features :

The heater component of the product is made of Positive Temperature Coefficient electric resistance(PTC).
It's heating very fast and automatic of control temperature.
The hot melt glue gun can use normally in 110V to 220V power supply, be free from the electric voltage motion to limit, inside place the fuse, use more safe.
The electricity strength was not to broke through of the product insulate while switch on electricity 1800Vs / minute.

Application :

The toy model.
Artifical flowers, Christmas tree.
Decorations, the metals product.
The wood product, card paper.
Electronics circuit plank etc.

Operation Method :

1. The Series product can use the diameter fro Φ7.0mm to Φ7.5mm of melt glue.
2. Insert the gum from the glue gun tail, sent to the gun tube, put on the power supply to preheating from 5 to 8 minutes, button up to move the trigger and can extrude the melt glue, and can control the melt glue quantity.
3. While it's working, if the melt glue is inexhaustibility in one time, then the melt glue need not take out. Put on the power supply supply to preheating 5 to 8 minutes when it using next time.

Caution :
1. The hot melt glue gun is a high temperature product. If the customer usd the size of the melt glue that types not agree with, it would caused teh melt glue reflux and damage the lue guns.
2. Do not touch the nozzle area and melted glue, for they are high temperature when thay are working. Forbid to use in the situation that easy fuel and explode easily.
3. While it's working, do not raise it, and teh nozzel can't upward. If the glue gun does not work continuously for 15 minutes, please cut off the power supply. In order to prevent the melts glue to pour from the glue gun to damage it as all.
4. The new glue gun white using for teh first time may appear to emit few smoke, this is the normal phenomenon. Ater the glue gun is using 30 minutes, the smoke will auto cancellation.
5. Should usually keep the slippery piece of the glue gun tail sweep, for the melt glue can send into the gun tube smoothly, forbid to pull out the melt glue from the glue gun tail parts.
6. The glue gun should keep dry in the airiness of lpalce, out of the reach of children.
7. This tool are not ust must place at it of support up.

Specification :

Total Length: 130mm
Total Height: 120mm
Total Thickness: 25mm
Nozzle Diamter: 1.8mm
Nozzel Length: 25mm
Power: 20W

Package includeds :

1 x Melt Glue Tool (Come with an adapter according to your country~)
Details pictures :